PG Performance :: Audi Parts :: EuroCode Tuning Alu Kreuz Billet Aluminum Drivetrain Stabilizer for B8 A4/A5/S4/S5/Q5
EuroCode Tuning Alu Kreuz Billet Aluminum Drivetrain Stabilizer for B8 A4/A5/S4/S5/Q5
EC0101-0101

During ECT's testing of the B8 chassis cars which are comprised of the Audi A4, S4, A5, S5 and Q5, they found that there was quite a bit of torsional flex coming from the factory subframe/engine carrier. This torsional flex produced what we felt to be incorrect steering sensitivity and response in all aspects of driving. To combat this unwanted characteristic, they did a thorough examination of the front suspension, chassis unibody, and the engine carrier/subframe. ECT's conclusion was that the OEM hollow steel drivetrain stabilzer underperformed.

The team at Eurocode set out to combat this torsional flex and decided to redesign the drivetrain stabilzer. Their first step was to analyze the material that the factory stabilzer was made up of and then create a load case scenario in which to test it under. They sent out a sample for materials testing and found the factory stabilizer to be made up of carbon steel with a density of 0.284 lb/in3, predominately hollow and stamped into shape. The OEM stabilizer is made up of nine separate pieces, and they are all welded together to form one single unit. Once all of this data was collected and loaded, the ECT team set out with the goal of improving chassis rigidity and weight reduction. They found that a replacement stabilizer manufactured out of billet aluminum would accomplish our goals, so the next step was the design process.

The design process went through several revisions, with each version being loaded into computer modeling to test how it would stack up against the inferior OEM product; these revisions were also built and tested not only on the road, but as well as on a closed course with the feedback provided by a professional driver to the design engineers.
The finished product, which they dub “Alu Kreuz”, is incredible. It features a one piece, billet T7 aircraft aluminum construction, type III hard anodized coating, and all necessary provisions to attach the OEM sound deadeners. It requires zero modification to the vehicle, and works perfectly with the OEM power steering cooler. The Alu Kreuz is also nearly two pounds lighter than the OEM brace and greatly improves chassis torsional rigidity. It looks amazing as well.

Independent analysis was performed on the product and the conclusions were that in each of the pre set load case scenarios, the Alu Kreuz deflected less than the OEM stabilizer, carries less stress for a given applied load and the fatigue life of the product is greater than OEM.

 
Weight 18.00 lbs
 
Price: CDN$567.00 (USD$420.00)
 
 
Quantity
 
: *
: *
: *
 
Virtual Merchant

Official PayPal Seal