Forge Motorsport is pleased to announce a completely retooled, redesigned, and reengineered range of induction hoses for all VAG 1.8T applications.
They have spent the last year co-developing a range of vehicle specific hoses with silicone manufacturer SiliconHoses.com guaranteed to rival the best offerings from any other manufacturer on the market today in terms of quality, price, and most importantly, performance.

Fitment guide:

FMGOLFIND
The first hose released from this new range is the induction hose for 1.8T Golf's, Jetta's, GTI's, and New Beetle Turbo S's. This hose fits all of the following engine codes on the above mentioned vehicles:
- AWW - AWD - AWP - AUM - APP - AWU - AUQ
AWW engine codes require a small blanking plug for a port on the hose not used on this engine code. This plug is included at no additional charge.

Engine Code
It is possible to identify the code of the engine fitted within your vehicle by removing the plastic engine cover (rotate the plastic bolts securing the cover through 90 degrees) The engine code (three letters) should then become visible on the left hand side or rear of the engine (depending on application) as you are stood at the front of the vehicle.
These hoses have been designed and manufactured with the utmost care given to quality and performance.
The silicone compound used in the construction of the hoses is of the highest sheer strength available and is hand-laid with a polyester reinforcement fabric. The layering of the hoses is far more uniform and consistent than of that from any other manufacturer which improves the overall structural integrity of the hoses up to 50%.

The internal surface of the hose is completely smooth and unobstructed and the internal volume of this hose has been increased to provide the highest level of airflow at all points within the power band.
We have also taken extra care to ensure consistency between each hose produced and that each hose includes all of the necessary ports and provisions required for each engine code and application as have often times been missing on hoses from other manufacturers.

Each Forge Motorsport Induction Hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. (Please select from the options list below your colour choice when ordering.)

Some fitment variations
Available at a nominal additional charge is an adapter (FMPCV1925) to allow the fitment of this hose where the newer style 25mm PCV valves (previously 19mm) are installed.

Comes with a standard 19mm PCV valve port
(19mm port with optional 25mm step-up adapter also available: #FMPCV2519)
(see detailed images)

Dyno testing has been performed, by independent reviewer and Forge dealer NGP Racing on their in-house DynoJet dynamometer (See Detailed Images):
Testing was performed on a 2003 Jetta 1.8T with an AWP engine code.
The vehicle modifcations include:
- EVO Cold Air Intake.
- TT 2.5" Turbo-Back Exhaust.
- Forge 004 Blow-off Valve.
- N75J Valve.
- APR 93 Octane Chip.
For the benefit of those without engine software modifications testing was conducted with stock ECU software and also APR's 93 octane software.

*When ordering please select colour of hose and engine code of vehicle. Failure to do so may result in the wrong hose variant being supplied.

*Please be aware that these hoses were patterned from right hand drive vehicles. Whilst we believe these to be correct for left hand drive vehicles we suggest that you visually check their suitability, as replacement items, with those fitted to your own vehicle, before attempting installation.